A counter box that lets people pull out one CBD sachet, gummy pack or pre-roll tube at a time from a hole in the front. We make them in printed SBS or kraft, or E-flute if they’re heavy. Tear-off front or open window, your call, and there’s room for batch info.
Your time is very important to us so we have kept it short.
Ever grabbed a pack of gum at the register without really meaning to? Single-serve CBD sells the exact same way, somebody’s paying for something else and they see a little pile of gummy sachets or pre-roll tubes by the card reader and one ends up in the bag. Custom CBD dispenser boxes are that pile, just with your name printed all over it and a hole in the front so product comes out one at a time while the rest waits stacked up behind.
Who buys them? Smoke shops, dispensaries, now and then a cafe. Trade show sample tables too. And we usually point out the box can double as your wholesale carton, the shop opens the front and it goes by the till.
It’s pretty low tech, to be fair. You stack the product inside, there’s a cutout low on the front panel, the customer pulls the bottom one out and the next one drops down into its spot, and that works great for flat stuff like sachets or stick packs or blister cards. Tubes are different. For tubes and small bottles we’d go with a tray, open at the front, with a tall back panel that’s basically a tiny billboard for your logo.
Lots of brands ship them closed with a perforated strip across the front. Store tears it, box is ready. We care a lot about that perforation actually being straight (a ragged tear and your display looks tired on the first morning, and staff notice that stuff).
Start with one unit. Measure it, then figure out how many you want in a box, and most people land on 12 or 24, sometimes 50 for thin sachets. Pack too many and the stack gets heavy and jams up at the slot. Too few? The shop’s refilling it every afternoon and they’ll get annoyed. If it’s pre-roll tubes, we leave a hair of room at the sides so they don’t wedge crooked once the box is half empty.
Board comes down to weight, really. Light sachets are fine in SBS paperboard, which also prints the brightest. Kraft if your brand is the earthy, plant-forward type. Got glass tincture minis in there, or shipping them full to stores? Then E-flute corrugated. You can see both builds side by side on our cardstock dispenser boxes and cardboard dispenser boxes pages.
Labels are where people get stuck, since the rules change state to state and this box might be the only thing a shopper reads. We’d leave room for the name and the CBD per piece. Batch number spot. A QR code that goes to your lab results, and then whatever warnings your state asks for. We print what you send us. So check your rules first, please, our CBD packaging labeling guide is a decent place to start.
Style wise, matte lamination looks calm and clean, and we like a little foil or spot UV on just the logo so it reads from across the counter. Our designers do the dieline and set your artwork at no charge, check the files for print issues, and send you a digital proof. Minimums are often around 50 boxes depending on style. Production is 10 to 12 business days after you approve, and shipping in the USA is free. Selling gummies in their own retail pack too? Have a look at CBD gummy packaging, or the whole dispenser packaging range.
Sure. We’d use the open tray style for tubes, printed back panel for branding, and a bit of side room so they don’t jam.
Yep, go with E-flute and a tear-away front. The store rips the strip off at the counter and that’s it.
Depends how fat your sachet is, honestly, somewhere around 24 to 50 for most. Send us one sample (or just the measurements) and we’ll size it.
Brands ordering these often look at custom cardstock dispenser boxes and custom cardboard dispenser boxes as well. You can see the full range in dispenser packaging, and our guide to CBD packaging compliance helps with sizing.
